Farm Solar PTZ Kit

Farm Solar PTZ (SD2X) security camera Kit-WiFi


(R18,950.01 kit)

Tax included
Reference: Solar PTZ (SD2X) Kit-WiFi

A off grid Pole Mount Solar kit that includes a 18 X optial zoom PTZ camera. This pole-mounted solar power kit uses Lithium battery’s

50W solar pannel with a 20Ah battery pack

Read our FAQ on Solar here

Read our article on what size is best for you here

***Please note client to provide pole, product takes 3 days assembly time before shipping***

By Order Only - Lead time 14 days

  Delivery policy

All local packages are shipped via The Courier Guy with tracking and drop-off with signature.



Pole mount for solar panel: Aluminium alloy brackets with stainless steel hardware

Setting angle: 45° for capturing the correct angle for the sun

Mounting pole (to be supplied by installer/customer for combination of solar panels and battery/control box): recommended minimum - 75mm x 3mm steel for 3metre above ground

NOTE: POLE is NOT INCLUDED in the kit and dimension are only a guideline. It is the responsibility of the client to ensure that correct erection procedure for the pole is followed.

Wind load: 80Kkm/Hr

Hail loading: 1.1Kn/m ²

Assembled weight (includes 1 x 30W panel): 5kg

Attention: Edges may be sharp

Solar panel mount set comes with: 1 upper bracket, 1 lower bracket, 2 x U-bolts (straps), 2 x M6 hex-head bolts, 4 x washers, 2 x M6 nyloc nuts, 2 x M6 hex-head bolts for solar panel, 4 x flat washers for solar panel, 2 x nyloc nuts for solar panel.

Installation: To the greatest extent possible, the installation site should allow full exposure to the sun throughout daylight hours.

SPECIFICATIONS – Control and Battery Cabinet

Depending upon the customer requirement, two battery pack options are available in the enclosure shown being 20Ah.

Solar charging is by means of a Monocrystalline Solar panel

The solid state controller integrates all aspects required for optimal operation of the unit with:

  • Solar charge controller specifically for LiFepo4 cells with BMS on 20Ah unit
  • Regulated outputs for two cameras and a USB communication device
  • Unregulated output for LTE router or CPE (not included)

Cabinet: Polyester / Polycarb 300 x 250 x 130mm

Pole mount bracket: U-clamp / strap top and bottom

Batteries: 1 x 12V 20Ah LiFeP04 batt pack

Solar Charge Controller: 10A

Camera Voltage Protector: 2A


The SD2X camera support both 2.4 and 5GH Wi-Fi,  so merely connect to your existing infrastructure 

If you are looking for LTE(4G) connectivity then please look here:

If you are looking for long range point to point connectivity then please look here:

Power Connectors for: Camera; Router; Solar panels

Total Weight of control and battery cabinet: 8kg

Cabinet mounting set comes with:

1 upper bracket, 1 lower bracket, 2 x U-bolts (straps),

4 x M6 hex-head bolts, 8 x washers, 4 x M6 nyloc nuts

 Read our blog on off grid solar cameras HERE

Solar PTZ (SD2X) Kit-WiFi

Specific References


in the same category