• Pack
Farm Solar PTZ Kit

Farm Solar PTZ (SD4) Kit-WiFi


(R15,990.00 kit)

Tax included
Reference: Farm Solar PTZ (SD2) Kit

A off grid Pole Mount Solar kit that includes a 4Meg 2K PTZ camera with 4 X Optical zoom. This pole-mounted solar power kit uses Lithium battery’s

50W solar pannel with a  20Ah battery pack

***Please note client to provide pole, product takes 3 days assembly time before shipping***

Read our FAQ on Solar here

Read our article on what size is best for you here



Pole mount for solar panel: Aluminium alloy brackets with stainless steel hardware

Setting angle: 45° for capturing the correct angle for the sun

Mounting pole (to be supplied by installer/customer for combination of solar panels and battery/control box): recommended minimum - 75mm x 3mm steel for 3metre above ground

NOTE: POLE is NOT INCLUDED in the kit and dimension are only a guideline. It is the responsibility of the client to ensure that correct erection procedure for the pole is followed.

Wind load: 80Kkm/Hr

Hail loading: 1.1Kn/m ²

Assembled weight (includes 1 x 50W panel): 5kg

Attention: Edges may be sharp

Solar panel mount set comes with: 1 upper bracket, 1 lower bracket, 2 x U-bolts (straps), 2 x M6 hex-head bolts, 4 x washers, 2 x M6 nyloc nuts, 2 x M6 hex-head bolts for solar panel, 4 x flat washers for solar panel, 2 x nyloc nuts for solar panel.

Installation: To the greatest extent possible, the installation site should allow unshaded exposure to the sun throughout daylight hours.

SPECIFICATIONS – Control and Battery Cabinet

Depending upon the customer requirement, two battery pack options are available in the enclosure.

Solar charging is by means of a Monocrystalline Solar panel

The solid state controller integrates all aspects required for optimal operation of the unit with:

  • Solar charge controller specifically for LiFepo4 cells with BMS on 20Ah unit
  • Regulated outputs for a camera and a USB communication device
  • Unregulated output for CPE or LTE router

Cabinet: Polyester / Polycarb 300 x 250 x 130mm

Pole mount bracket: U-clamp / strap top and bottom

Batteries: 1 x 12V 20Ah LiFeP04 batt pack

Solar Charge Controller: 10A

Camera Voltage Protector: 2A


The camera is equipped with dual band Wi-Fi 2.4G/5G dual band, IEEE802.11b/g/n/ac, as long  as you have Wi-Fi coverage at the location your good to go.

Power Connectors for: Camera; Router; Solar panels

Total Weight of control and battery cabinet: 8kg

Cabinet mounting set comes with:

1 upper bracket, 1 lower bracket, 2 x U-bolts (straps),

4 x M6 hex-head bolts, 8 x washers, 4 x M6 nyloc nuts

  Live streaming demo's

How to support videos


Micro SD Card

Read our blog on off grid solar cameras HERE

Farm Solar PTZ (SD2) Kit
1 Item

Specific References

Rated 4.50 on the scale 1 - 5 based on 1 customer reviews
Verified purchase

Does the job

Having done extensive research online I settled on this unit from Foscam.<br /> <br /> The camera is a lovely little unit but think next time I will spend a little more for SD2X with more zoom.<br /> <br /> The solar for my area (NC) works great, have not had any down time in over 2 months since it’s been up.<br /> <br /> The app works great no matter where I am and I like the Foscam VMS software that I have on my laptop. <br /> <br /> Jut one thing, the u-clamp bracket is designed for a 50m diameter pole so if you have a bigger pole its best to let them know before you place your order.<br />

Was this comment useful to you? Yes No

in the same category