Farm Solar PTZ (SD2X) Kit + 2 X CPE

Farm Solar PTZ (SD2X) Kit CPE

New

1 Item

IN STOCK


A off grid Pole Mount Solar kit that includes a PTZ camera with 18 X Optical zoom. This pole-mounted solar power kit uses Lithium battery’s that offer a Run (dark) time of 24 to 36 hours with a recovery time from full discharge of less than 30mins at 50% solar power.

2 X Long distance CPE wireless units included

 

More details

B B

More info

Reviews

Pack content

More info

SPECIFICATIONS – Solar Mount

Pole mount for solar panel: Aluminium alloy brackets with stainless steel hardware

Setting angle: 45° for capturing the correct angle for the sun

Mounting pole (to be supplied by installer/customer for combination of solar panels and battery/control box): recommended minimum - 75mm x 3mm steel for 3metre above ground

NOTE: POLE is NOT INCLUDED in the kit and dimension are only a guideline. It is the responsibility of the client to ensure that correct erection procedure for the pole is followed.

Wind load: 80Kkm/Hr

Hail loading: 1.1Kn/m ²

Assembled weight (includes 1 x 30W panel): 5kg

Attention: Edges may be sharp

Solar panel mount set comes with: 1 upper bracket, 1 lower bracket, 2 x U-bolts (straps), 2 x M6 hex-head bolts, 4 x washers, 2 x M6 nyloc nuts, 2 x M6 hex-head bolts for solar panel, 4 x flat washers for solar panel, 2 x nyloc nuts for solar panel.

Installation: To the greatest extent possible, the installation site should allow unshaded exposure to the sun throughout daylight hours.

SPECIFICATIONS – Control and Battery Cabinet

Cabinet: Polyester / Polycarb 300 x 250 x 130mm

Pole mount bracket: U-clamp / strap top and bottom

Batteries: 1 x 12V12Ah LiFeP04 batt pack

Solar Charge Controller: 10A

Camera Voltage Protector: 2A

TP-Link CPE510 point to point connectivity

Supplied two CPE510 pre-configured as a bridge to connect your camera to your main site, line of sight up to 15KM.

Connect the one to the POE injector supplied in the kit and the other at your main site.

 

Power Connectors for: CPE, Camera; Router; Solar panels

Total Weight of control and battery cabinet: 8kg

Cabinet mounting set comes with:

1 upper bracket, 1 lower bracket, 2 x U-bolts (straps),

4 x M6 hex-head bolts, 8 x washers, 4 x M6 nyloc nuts

 

Path: > > Farm Solar PTZ (SD2X) Kit + 2 X CPE

Pack content

  • R1,500.00
    2 x
    R1,500.00

    TP-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, user-friendly design, makes CPE510 an ideal choice...

    TP-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized...

  • R6,400.00
    1 x
    R6,400.00

    2MP 1080p Outdoor WiFi PTZ Security Camera, 18x Optical Zoom, Dual band wireless Foscam SD2X is a powerfull outdoor PTZ security camera. With a massive 18x optical zoom. With dual band Wi-Fi, connection is easy. It also has a built-in microphone and human detection. The Foscam SD2X represents amazing value for an outdoor surveillance camera with these...

    2MP 1080p Outdoor WiFi PTZ Security Camera, 18x Optical Zoom, Dual band wireless Foscam SD2X is a powerfull outdoor PTZ security camera. With a massive 18x...

  • R7,383.00
    1 x
    R7,383.00

    A off grid Pole mount Solar System for Foscam IP Cameras. These pole-mounted solar power kits with Lithium battery are the perfect solution to your remote power needs for deploying a remote camera.  1 x 12V 12Ah LiFeP04, 30hr to 40hr run-time (Winter solstice) Stated runtime is based on one Foscam camera and supplied LTE router or TP-Link CPE only Please...

    A off grid Pole mount Solar System for Foscam IP Cameras. These pole-mounted solar power kits with Lithium battery are the perfect solution to your remote...

Similar products

These products are in the same category